Skip to main content

Bring the neighborhood in this holiday season. To mail before the holidays, approve your design by Tuesday, December 15. See holiday designs

L&B Printing

Help · Design & Proofs

What makes a file print-ready?

Final size plus 0.125″ bleed, photos at 300 DPI, text 0.125″ inside the trim, and the mailing area left clear.

Open the upload stepStep-by-step, with the real screens, below.

In short

The four things that matter most:

  1. Correct final size and bleed for the selected product.
  2. Enough image resolution for the size at which the image is printed.
  3. Readable text and content inside the safe area.
  4. Required postal clear areas left usable.

The exact sizes, bleed and clear areas are on Print Specs, which is the one specification source.

An L&B Direct Mail Expert reviews every direct-mail file before it goes to print.

If any of this is unfamiliar, it is not a reason to stop. Upload the file and we will look at it before anything prints.

Bleed, trim and safe area

A 9″ × 6.25″ postcard: the bleed band outside the trim line, and the safe area inside it. Margins drawn 4 times larger than life.BLEEDTRIMSAFE AREAheadlines · phone · logo · QR code
  • Bleed — background colour and photos run to here: 0.125″ past the trim, every side
  • Trim — where the card is cut: 9″ × 6.25″
  • Safe area — text, logos and QR codes stay inside: 0.125″ inside the trim, every side
  • File — 9.25″ × 6.5″ at 300 DPI. The margins are drawn 4× larger than life so they can be seen.
Bleed: background colour and photos run 0.125″ past the trim on every side, so no white sliver shows after cutting. Trim: where the card is cut. Safe area: headlines, phone numbers, logos and QR codes stay 0.125″ inside the trim. The print template on the upload step carries all three lines for the EDDM postcard chosen in Size; its button names that size.

The file size for each postcard

ItemExport the file atSmallest photo or image (300 DPI)
EDDM 6.25" × 9"6.5″ × 9.25″ — the trim plus 0.125″ bleed on every side1950 × 2775 pixels
EDDM 6" × 11"6.25″ × 11.25″ — the trim plus 0.125″ bleed on every side1875 × 3375 pixels
EDDM 8.5" × 11"8.75″ × 11.25″ — the trim plus 0.125″ bleed on every side2625 × 3375 pixels
Addressed 5" × 7"5.25″ × 7.25″ — the trim plus 0.125″ bleed on every side1575 × 2175 pixels
Addressed 6" × 9"6.25″ × 9.25″ — the trim plus 0.125″ bleed on every side1875 × 2775 pixels

Passes or warns, at the 6.25" × 9" postcard

ItemImageMeasured at the printed sizeWhat the upload step shows
Passes3400 × 2400 pixels368 DPINothing on the upload step; on Review Design, a green line: “368 DPI. Meets print quality requirements”
Warns1500 × 1000 pixels154 DPIAn amber box, Low resolution detected, naming the side and “about 154 DPI”; on Review Design: “154 DPI. Below 300 DPI minimum. Image may appear blurry when printed.”
The line1950 × 2775 pixels or more300 DPIEqual to the minimum passes.

Before you start

  • The design program’s export, as JPG, PNG, WebP, TIFF, PDF, up to 50 MB a file. A PDF keeps text and logos sharp.
  • The file at the final size with bleed — 6.5″ × 9.25″ for the 6.25" × 9" postcard. The print template from the upload step is already that size for the EDDM postcard chosen in Size, which its button names; for an Addressed postcard, use the table above.
  • Photos at 300 DPI at the size they print; text, logos and QR codes 0.125″ inside the trim.
  • For EDDM, a front and a back. The back is the mailing side, with its top-right corner kept clear.
  • No sign-in is needed to upload and see the resolution check. Nothing is charged until you pay at checkout.

Step by step

  1. Step 1: Set the file up at the final size, with bleed

    Make the document the trim size plus 0.125″ on every side — 6.5″ × 9.25″ for the 6.25" × 9" EDDM postcard; every other size follows the same rule, its trim plus 0.125″ on each side. Run background colour and photos to the very edge; keep text, logos and QR codes 0.125″ inside the trim. The print template from the upload step has the bleed, trim and safe lines drawn on it for the EDDM postcard chosen in Size — its button names that size and changes with it; coming from the Route Picker or the EDDM Postcards page it opens on the size you chose there. An Addressed postcard's upload has no template: set the document up yourself by the same rule — its trim plus 0.125″ on each side — and check the size before you export. For an EDDM postcard, the back is the mailing side: keep its top-right corner clear for the USPS postage mark (indicia) and the “Postal Customer” line.

    The File Requirements card: "Print template PDF (9″ × 6.25″)" and "or SVG" buttons, then the list — both sides required and the back's top-right corner kept clear for the USPS postage mark and the "Postal Customer" line, the minimum resolution at final print size, the bleed on all sides, the accepted formats, and CMYK recommended.
    1. A: Download the template PDF: bleed, trim and safe lines, for the postcard chosen in Size
    2. B: The same template as SVG, for design programs
    3. C: The resolution the file needs
    4. D: The bleed the file needs
    The File Requirements card: "Print template PDF (9″ × 6.25″)" and "or SVG" buttons, then the list — both sides required and the back's top-right corner kept clear for the USPS postage mark and the "Postal Customer" line, the minimum resolution at final print size, the bleed on all sides, the accepted formats, and CMYK recommended.
    The same File Requirements card on a phone, the template buttons above the list.
    1. A: Download the template PDF
    2. B: The resolution the file needs
    3. C: The bleed the file needs
    The same File Requirements card on a phone, the template buttons above the list.
    Sizes and counts in the screen are an example; yours are measured live.

    What you should see. A front and a back, each 6.5″ × 9.25″ (for the 6.25" × 9" postcard), with the background running past the trim.

  2. Step 2: Check the photos before you export

    A photo needs 300 DPI at the size it prints. The simplest check is the pixel size: for the 6.25" × 9" postcard a full-bleed image needs at least 1950 × 2775 pixels, and an image used at half the width needs half the pixels across. Look at the original file’s properties, not a copy saved from a website, an email or a screenshot. Enlarging a small image in your design program does not add detail. Logos and text are best as vector artwork in a PDF, which has no resolution to run out of.

    What you should see. Every photo’s pixel size at or above what its printed size needs; logos and text as vector, or exported with the file at 300 DPI.

  3. Step 3: Export, then open the upload step

    Export as JPG, PNG, WebP, TIFF, PDF — a PDF keeps vector text sharp; a JPG or PNG is fine for a finished image. The file can be up to 50 MB. Then open Upload Your Design: from the EDDM Postcards page or a campaign, or from the Route Picker’s “Upload My Design Instead” once you have chosen routes. Set Size to the postcard the file was made for, and choose the Paper.

    The upload step as it opens: "Upload Your Design" for EDDM Postcards, a Size and a Paper selector, two dashed upload areas labelled Front and Back (mailing side), each saying "Drop your file here or click to browse", and a File Requirements card with the print template downloads.
    1. A: Size: the postcard the file is for
    2. B: Paper
    3. C: Front: click it, or drop the file on it
    4. D: Back (mailing side): required for EDDM
    5. E: File Requirements
    6. F: The print template: drawn for the postcard chosen in Size, which its button names
    The upload step as it opens: "Upload Your Design" for EDDM Postcards, a Size and a Paper selector, two dashed upload areas labelled Front and Back (mailing side), each saying "Drop your file here or click to browse", and a File Requirements card with the print template downloads.
    The same upload step on a phone: Size and Paper, then the Front and Back upload areas stacked, then the File Requirements.
    1. A: Size: the postcard the file is for
    2. B: Front upload area
    3. C: Back (mailing side)
    4. D: The print template
    The same upload step on a phone: Size and Paper, then the Front and Back upload areas stacked, then the File Requirements.

    What you should see. Two upload areas, Front and Back (mailing side), with the File Requirements and the print template beneath them.

  4. Step 4: Upload the front, then the back

    Click an upload area and choose the file, or drop it onto the area. A progress bar runs while it uploads; when it finishes, the area becomes a card with your image and “Uploaded” and the file size beneath it. A PDF shows its first page once it has been drawn. Remove swaps the file for another. An EDDM postcard needs both sides before you can continue.

    What you should see. A card for each side with its image and “Uploaded · (file size)”.

  5. Step 5: Read the resolution check

    For a JPG, PNG or WebP, the page measures the image’s pixels against the Size you chose, with the bleed. Above the minimum, nothing appears. Below it, an amber box, Low resolution detected, names the side and the resolution it measured. You can still continue, but the image may print soft; if you have a larger original, Remove the file and upload that instead. A PDF is not measured here, and in most browsers a TIFF is not either: a PDF shows no message, and a TIFF the browser cannot read gets a grey line under the cards saying so — not measured, not passed; their images are checked in the readiness review.

    What you should see. Either no message under the two cards, the amber Low resolution detected box naming the side, or the grey not-measured line for a TIFF the browser cannot read.

  6. Step 6: Review Design, then continue

    Review Design shows both sides large, with a line for each: green when the image meets the minimum, amber when it is below. Check the names, phone numbers, URLs, dates and offer as well — what you continue with is what prints, after the review. An L&B Direct Mail Expert reviews every direct-mail file before it goes to print. Then Choose Neighborhoods if you have not chosen them yet, or Approve & Add to Cart if you came from the Route Picker; Change Files goes back to swap a side.

    What you should see. Review Your Design, with a resolution line per side and the next action beneath. Nothing is charged until you pay at checkout.

If something goes wrong

“Low resolution detected — Front: about … DPI. Your image is below 300 DPI and may appear blurry when printed. You can still continue, but it may print soft. Upload a higher-resolution file if you have one.”

The image has too few pixels for the Size you chose. Find the original photo or export (not a copy from a website, an email or a screenshot), check its pixel size against the table above, and upload the larger file with Remove and then the upload area. If the Size is wrong, change it: the measurement uses the size you chose. If no larger original exists, use the image smaller in the layout, choose another photo, or continue knowing it may print soft.

My artwork looks blurry or pixelated.
“… DPI. Below 300 DPI minimum. Image may appear blurry when printed.”

The same measurement, on the Review Design step, side by side. Change Files takes you back to swap the side it names.

“That file type cannot be used for printing. Please send a PDF, JPG, PNG, TIFF or WebP.”

The file is a type the uploader does not take — a .gif, a Word or Pages document, or a design program’s own file such as .ai, .psd or .indd. Export it from the program as one of JPG, PNG, WebP, TIFF, PDF and choose it again with Retry. If you cannot export it, send the file to L&B instead.

After choosing a .gif file: the card shows the file name, and a red line beneath says "That file type cannot be used for printing. Please send a PDF, JPG, PNG, TIFF or WebP." with a Retry button beside it. Nothing was uploaded.
  1. A: The file you chose
  2. B: Why it was refused, before any upload
  3. C: Retry, after you export the right type
After choosing a .gif file: the card shows the file name, and a red line beneath says "That file type cannot be used for printing. Please send a PDF, JPG, PNG, TIFF or WebP." with a Retry button beside it. Nothing was uploaded.
The same refused .gif on a phone: the file name, the red message, Retry.
  1. A: The file you chose
  2. B: Why it was refused
  3. C: Retry
The same refused .gif on a phone: the file name, the red message, Retry.
Send files to L&B
“This file is too large to upload (limit 50 MB). Please export a smaller print-ready file, or contact L&B and we can help.”

Export a flattened PDF, or a JPG at 300 DPI at the printed size; turn off “preserve editing capabilities” and embedded thumbnails. A print-ready postcard file is usually well under 50 MB.

“This image is far larger than printing needs. Please send a version around 300 DPI at its printed size, or contact L&B and we can help.”

The image is far beyond what the postcard can use — more than 12,000 pixels on a side, or more than 80 million pixels in all. Export it at 300 DPI at the printed size (the table above gives the pixel size each postcard needs).

“That file does not look like the type it claims to be. Please re-export it and try again.”

The file’s name says one type and its contents another — usually a renamed file. Export it again from the program that made it, with the extension it chooses.

“Your front file is portrait, but this postcard is landscape (…). If that isn't intended, upload a landscape file.”

A note, not a refusal: the file’s long side runs the other way from the postcard’s. If you designed it the other way round on purpose, continue; otherwise rotate or re-export it so the long side is the width, and upload that.

“Add your back design to continue. An EDDM postcard mails from its back.”

An EDDM postcard is two sides: the back carries the USPS postage mark and the “Postal Customer” line, so the order cannot continue with a front alone. Upload the back in its own area.

“Your file didn't upload. Check your connection and try again, or call 908.232.7770.”

The connection dropped before the file arrived; the uploader has already retried a few times. Check that you are online and upload it again. A very large file over a slow connection is the usual cause — a smaller export helps.

“Too many requests. Please try again later.”

Wait a minute, then upload once more.

“This design is already on an order and can no longer be changed. Start a new design to make changes.”

This artwork has already been ordered, so its files are locked. Reload the upload step to start a new design, or contact L&B about the order.

“Missing required fields: file, design_id, field”, “Invalid design_id format — must be a valid UUID” or “Invalid field format”

The page lost track of the design it was building. Reload the upload step and upload the files again.

Next